How to Keep Pressure Washing Equipment Ready to Use, According to Colorado Pressure Washer Service And Repair Companies
April 03, 2019
Calling someone in to handle Colorado pressure washer service and repair can quickly resolve the problem. But when the equipment needs servicing more frequently than expected, then it’s a good idea to keep it well-maintained. The best way to avoid having to constantly deal with a broken pressure washer is to know how to properly handle and care for it.
Tips from PSI Washers Colorado pressure washer service and repair
Here are the tools needed:
- Cleaning brush
- Eye protection
- Gas can
- Oil drain pan
- Spark plug tools: socket, gap tool, feeler gauge, and a plug wrench
- Socket wrench
You also need these materials:
- Air filter
- Antifreeze, or pump lubricant
- Drop cloth
- Engine oil
- Fuel stabilizer
- And, in case the spark plug tools haven’t tipped you off, you also need a spark plug
Things to do before using the pressure washer
Like any good pressure washer repair Colorado Springs technician will tell you, you don’t just break out the washer and start using it with abandon. You have to run preliminary checks on it, too, like any piece of machinery. On top of that, there needs to be regular maintenance work. Your machine requires scheduled inspections and attention so you can spot any potential problem before it blows up into a major issue.
- Ensure that the oil and fuel levels on gas-powered models are filled up properly. Don’t overfill, either. Too much of a good thing is a bad thing, as the old saying goes.
- The washer has a lot of components that need attaching; spray gun, wand extension, spray tip, high-pressure hose, and other things. Make sure that they’re undamaged and they’re properly connected to the machine.
- Interior components can get dirty and clogged, which not only hinders their performance, but can even lead to catastrophic damages. In case this wasn’t obvious already, make sure to check up on this, and rectify it, if needed.
- Don’t be afraid to test out your washer and its components. Make sure whatever you’re pointing it at is something you want to get wet.
- Read the manual. User manuals are not only legally required, but they’re also really useful. They’ll help you get started on your washer. Even experts that handle Colorado pressure washer service and repair consult the manuals of washers they work on.
After using the pressure washer
After a cleaning project, it’s time to store the washer properly. Smart storage is the key to preserving equipment, as any pressure washer maintenance Colorado Springs professional can attest to.
- First, make sure the machine is properly rinsed and no detergent remains. Detergent buildup is bad for your machine, so avoid it by running some water through the system for a minute or two after removing the siphoning tube.
- Turn off the pressure washer, as well as the water supply. If it’s electric, unplug it, too. Point the gun away from people or animals, then let it run until water no longer flows.
- Engage that trigger lock, and let the washer cool itself down.
- Make sure that there’s no water left inside the washer. For gas-powered models, give that recoil handle a good yank, or several. For electric models, turn it on then let the water exit the pump, then shut it down immediately.
- Debris is bad for your washer, so make sure to get rid of it.
If you’re still confused, we understand. Here at PSI Washers, we work hard to ensure we’re up to speed on using and caring for pressure washers, so we don’t get out-splashed by the competition. We’re more than happy to assist you with your washer needs, or even just to give out some helpful advhttps://cleanenergyheatingsystems.com/wind-clean-energy-waste-oil-furnace-heating-season/ice. If you want to know more, visit https://psisystemsinc.com/ for more information.